- -10%
Retractable bow thruster 12V
Availability: on stockReference: STE7512D
Easy docking, no drag, less noise
Even for the more experienced skipper, it can be difficult to manoeuvre the boat in harsh wind conditions and strong currents.The new line of retractables VETUS thrusters can be placed in shallow parts of the hull and will not disturb its smooth lines.This low drag solution will make your docking experience easier, faster and just plain more enjoyable.
A retractable thruster has the following advantages
Optimum forward placement in the bow, while maintaining depth by deploymentLess noise and vibration as it is not directly connected to the hullOptimum tunnel length with minimal lossesVirtually no marine growth, as there is no light when thruster is in retracted and closed positionMay be placed in the stern in (both sailing and motor) boats where it is not possible to install a tunnel thrusterLess drag as the lid is flush to the hullSmall dimensionsSuitable for power vessels up to 20 metres
Data sheet
- Voltage (V)
- 12 V
- Weight (lbs)
- 68
- Weight (kg)
- 31
- Current consumption (A)
- 500
- Ignition protection
- No
- Internal tunnel diameter (inches)
- 7 9/32
- Internal tunnel diameter (mm)
- 185
- Continuous operating time (min)
- 2
- Main fuse "slow blow" (A)
- 355
- Batteries 12 V, min./max. Ah
- 1x120/1x225
- Battery main switch: model BATSW / type BPMAIN
- 250 (BATSW)
- Max. operating time (minutes)
- 2
- Motor, reversible D.C.
- Yes
- Thrust (N / lbf)
- 700/70
- Power (hp)
- see metric
- Battery cables, length pos./neg. cables (ft/AWG)
- see metric
- Size A in inches, see drawing
- na
- Size B in inches, see drawing
- na
- Size C in inches, see drawing
- na
- Size D min./max. in inches, see drawing
- na
- Size E in inches, see drawing
- na
- Size F, diameter in inches, see drawing
- na
- Size G min. in inches, see drawing
- na
- Size H, diameter in inches, see drawing
- na
- Thrust (N / kgf)
- 800/80
- Power (kW)
- 4.4
- Battery cables, length pos./neg. cables (m/mm²)
- 0-8/70 8-11/95
- Size A in mm, see drawing
- na
- Size B in mm, see drawing
- na
- Size C in mm, see drawing
- na
- Size D min./max. in mm, see drawing
- na
- Size E in mm, see drawing
- na
- Size F, diameter in mm, see drawing
- na
- Size G min. in mm, see drawing
- na
- Size H, diameter in mm, see drawing
- na